MHSWR 1999: A Plain Guide to the Management Regulations
The Management of Health and Safety at Work Regulations 1999 explained: risk assessment, competent persons, training, young workers and pregnant workers.

An HSE inspector walks onto a refurbishment job after a complaint. The site manager hands over a thick folder of risk assessments. The inspector flicks through, finds one for "general works" that was copied from another job two years ago, and asks who wrote it, who checked it, and how the lads on the second floor were told about it. Nobody has a good answer. That conversation is really about one set of regulations.
The Management of Health and Safety at Work Regulations 1999 (often shortened to MHSWR) set out how employers must manage health and safety in practice. They require a suitable and sufficient risk assessment (regulation 3), proper arrangements to plan, control and review safety (regulation 5), help from competent people (regulation 7), emergency procedures, information and training for staff, and extra protection for young workers and new or expectant mothers. They sit under the Health and Safety at Work etc. Act 1974 and apply to almost every employer in Great Britain.
This guide walks through the regulations that matter most on construction, security and facilities management work, with plain explanations and site examples.
What the Management of Health and Safety at Work Regulations 1999 cover
The Health and Safety at Work Act sets general duties. MHSWR turns those duties into a management system. The regulations came into force on 29 December 1999 (SI 1999/3242). They apply to employers and, in some cases, to self-employed people whose work could put others at risk.
The main regulations are:
- Regulation 3: risk assessment
- Regulation 4: principles of prevention (set out in Schedule 1)
- Regulation 5: health and safety arrangements
- Regulation 6: health surveillance
- Regulation 7: health and safety assistance (competent persons)
- Regulation 8: procedures for serious and imminent danger
- Regulation 10: information for employees
- Regulation 11: co-operation and co-ordination on shared workplaces
- Regulation 13: capabilities and training
- Regulation 14: employees' duties
- Regulations 16 to 18: new or expectant mothers
- Regulation 19: protection of young persons
There used to be an Approved Code of Practice, L21. HSE withdrew it on 31 July 2013 and replaced it with web guidance, including its risk assessment pages and Managing for health and safety (HSG65). The regulations themselves haven't gone anywhere.
Regulation 3: a suitable and sufficient risk assessment
Regulation 3(1) is the heart of MHSWR. Every employer must make a "suitable and sufficient" assessment of the risks to the health and safety of its employees at work, and of the risks to anyone else arising from its work. That includes members of the public, visitors, other contractors and a client's staff.
The regulations don't define "suitable and sufficient". In practice it means the assessment fits the actual task and site, identifies the significant hazards, considers who could be harmed and how, and leads to control measures that are actually put in place. A generic sheet that could apply to any job anywhere usually falls short. Our guide to what HSE inspectors look for in risk assessments goes into this in more detail.
Three other parts of regulation 3 matter on site:
- Review (regulation 3(3)): the assessment must be reviewed if there's reason to suspect it's no longer valid, or if there's been a significant change. New plant, a different access route, a change of subcontractor or an incident are all triggers.
- Recording (regulation 3(6)): if you employ five or more people, you must record the significant findings and any group of employees identified as especially at risk.
- Young persons (regulations 3(4) and 3(5)): you mustn't employ anyone under 18 until you've assessed the risks to them, taking account of things such as inexperience, lack of awareness of risks and immaturity, the workplace layout, the equipment they'll use and the training they'll get.
On a construction job, the risk assessment usually sits inside the RAMS with the method statement, so the controls and the sequence of work are in one document.
Regulation 4 and Schedule 1: the principles of prevention
Regulation 4 says that where an employer puts preventive and protective measures in place, it must follow the general principles of prevention in Schedule 1. In summary:
- Avoid risks.
- Evaluate the risks that can't be avoided.
- Combat risks at source.
- Adapt the work to the individual, including workplace design, equipment choice and working methods.
- Adapt to technical progress.
- Replace the dangerous with the non-dangerous or less dangerous.
- Develop a coherent overall prevention policy.
- Give collective protective measures priority over individual measures.
- Give appropriate instructions to employees.
You'll recognise this as the thinking behind the hierarchy of control. Edge protection on a flat roof protects everyone and comes before a harness for one person. Substituting a water-based product comes before issuing respirators. PPE comes last because it's an individual measure.
Regulation 5: health and safety arrangements
Regulation 5 requires employers to make and give effect to arrangements for the effective planning, organisation, control, monitoring and review of their preventive and protective measures. The arrangements should be appropriate to the nature of the activities and the size of the business. If you employ five or more people, you must record them.
In plain terms, this is your safety management system. Who signs off RAMS? How are site inspections done and followed up? How do lessons from a near miss get back into the next assessment? A contractor with a tidy folder of risk assessments but no one checking whether the controls happen on site hasn't got effective arrangements.
Regulation 7: competent health and safety assistance
Regulation 7 requires every employer to appoint one or more competent persons to help it meet its health and safety duties. Under regulation 7(5), a person is competent if they have sufficient training and experience or knowledge and other qualities to assist properly.
A few details worth knowing:
- The number of competent persons, their time and their resources must be adequate for the size of the business and the risks.
- Where a suitable competent employee is available, regulation 7(8) says the employer should appoint them in preference to someone outside the business. External consultants are fine where you don't have that competence in-house.
- A self-employed person with no partners can do this themselves if they're competent.
Competence isn't a single qualification. On a small groundworks firm it might be an experienced contracts manager with an NEBOSH certificate and years on site. On a large FM contract it might be an in-house H&S team backed by specialists for asbestos or legionella. What matters is that the person understands the work and the risks well enough to judge whether the controls are right.
This is where regulations 3 and 7 come together. The first draft of a risk assessment might come from a template, a colleague or software, but the employer needs competent people involved to make sure it's suitable and sufficient before it's relied on.
Regulation 8: procedures for serious and imminent danger
Employers must set up procedures for serious and imminent danger, nominate enough competent people to put evacuation into effect, and keep employees out of restricted danger areas unless they've had adequate instruction. On site this covers fire and evacuation plans, emergency rescue from height or confined spaces, and who has the authority to stop work. First aid is covered by separate regulations, and our guide to the first aid needs assessment explains how to decide what you need.
Regulations 10 and 11: information and shared workplaces
Regulation 10 requires employers to give employees comprehensible and relevant information on the risks identified by the assessment, the control measures, the emergency procedures and the people nominated to carry them out. A RAMS nobody has read doesn't meet that. Briefings and toolbox talks are the practical way to get the information to the people doing the work.
Regulation 11 applies where two or more employers share a workplace. They must co-operate, co-ordinate their measures and tell each other about risks arising from their work. On a construction project, CDM 2015 adds specific duties for the principal contractor on top. In FM, it's the reason a maintenance contractor and the building occupier need to swap risk information before work in a live office.
Regulation 13: capabilities and training
When giving someone a task, the employer must take their capabilities into account as regards health and safety. Employers must also provide adequate health and safety training:
- when people are recruited
- when they're exposed to new or increased risks, for example through a change of role, new work equipment, new technology or a new or changed system of work.
Training must be repeated periodically where appropriate, adapted to new or changed risks, and take place during working hours.
A practical example: a security company moves an officer from a static retail post to mobile patrols covering vacant properties. The role now includes lone working at night, driving between sites and entering buildings with unknown conditions. That's a change of responsibilities with new risks, so regulation 13 means training before they start, not after an incident.
Young persons and new or expectant mothers
Young persons (under 18)
Alongside regulation 3(4) and (5), regulation 19 requires employers to protect young persons from risks arising from their lack of experience, lack of awareness of risks or immaturity. It lists types of work they shouldn't do, such as work beyond their physical or psychological capacity, or with harmful exposure to toxic or carcinogenic agents, radiation, extreme temperatures, noise or vibration. There's an exception for young people over school age where the work is necessary for their training, they're supervised by a competent person and the risks are reduced to the lowest level reasonably practicable. That's the route for most apprentices on site.
New or expectant mothers
A new or expectant mother means an employee who's pregnant, has given birth within the previous six months, or is breastfeeding. Where you employ women of child-bearing age and the work could pose a risk to a new or expectant mother or her baby, regulation 16 requires your risk assessment to cover those risks. If the risk can't be avoided, you must alter her working conditions or hours where that's reasonable and would avoid the risk. If that isn't possible, HSE's guidance says you must offer suitable alternative work, and if there isn't any, suspend her on paid leave for as long as necessary. For a cleaning operative working with chemicals or a site engineer doing heavy manual handling, that needs thinking through as soon as the employer is notified in writing of the pregnancy.
Employees' duties under regulation 14
MHSWR doesn't only put duties on employers. Employees must use equipment and safety devices in line with their training and instructions, and must tell the employer about serious and immediate dangers and shortcomings in protection arrangements. A good safe system of work makes those duties easy to meet, because people know what the controls are and who to tell.
How swiftRMS helps
swiftRMS is an AI RAMS tool that drafts risk assessments and method statements for construction, security and facilities management work. It's built around the process MHSWR describes, and it's designed to support your competent person, not replace them.
Here's how it fits:
- Drafting (regulation 3): you describe the task, the site and the people involved. swiftRMS produces a structured, legislation-referenced draft that cites the relevant legislation and sets out hazards, who might be harmed and control measures.
- Review and approval (regulations 3 and 7): the draft is ready for review. Your competent person checks it against the actual site and task, edits it, adds anything the draft has missed and approves it. Whether a RAMS is suitable and sufficient depends on the site and the task, so that review is essential.
- Information and review (regulations 10 and 3(3)): once approved, the document is the basis for briefings, and when the work changes you can redraft it and send it back for review.
Less time typing leaves more time for the part the law actually cares about: a competent person thinking about the job. You can see sample output on the RAMS examples page or read more about our RAMS software.
To see a legislation-referenced draft for one of your own tasks, try a free RAMS preview with no signup. If it's useful, there's a 14-day free trial with no card needed.
Frequently Asked Questions
What is the main purpose of the Management of Health and Safety at Work Regulations 1999?
They set out how employers must manage health and safety in practice. The central duty is to carry out a suitable and sufficient risk assessment (regulation 3) and act on it, supported by proper arrangements, competent assistance, emergency procedures, information and training.
Do I need a written risk assessment?
If you employ five or more people, regulation 3(6) requires you to record the significant findings of the assessment and any group of employees identified as especially at risk. Smaller employers still have to carry out the assessment, and on higher-risk work writing it down is sensible because it's how you brief people and show what you decided.
Who counts as a competent person under regulation 7?
Someone with sufficient training and experience or knowledge and other qualities to help the employer meet its health and safety duties. There's no single required qualification. Regulation 7(8) says employers should use a competent employee in preference to an outside adviser where one is available.
Is a RAMS drafted by software valid?
The law cares about whether the assessment is suitable and sufficient, not how the first draft was produced. That depends on the site and the task, so a competent person must review, edit and approve any draft, whether it came from software, a template or a previous job, before it's used.
Is L21 still in force?
No. HSE withdrew the L21 Approved Code of Practice on 31 July 2013 and replaced it with web-based guidance. The Management of Health and Safety at Work Regulations 1999 themselves are still in force.
How often should a risk assessment be reviewed?
MHSWR doesn't set a fixed interval. Regulation 3(3) requires a review whenever there's reason to suspect the assessment is no longer valid or there's been a significant change. Many firms also set a routine review date, but a change on site should always trigger a fresh look.
Official Resources
Recommended Tools & Resources
Save hours on health & safety paperwork — generate documents with swiftRMS.
Create a professional RAMS in under 2 minutes — UK legislation cited automatically.
From £49/mo. CDM 2015 referenced. 14-day free trial, no card needed.
The UK RAMS tools side by side: features, pricing and speed.
12+ trade-specific UK risk assessment templates with hazards and legislation.