First Aid Needs Assessment: A Practical UK Guide
How to carry out a first aid needs assessment under the 1981 Regulations and HSE L74: appointed persons, first-aider numbers, kits and remote or shared sites.

A labourer cuts his forearm on a sheet of steel at the far end of a housing site. Someone shouts for the first-aider. The only one on the list went home at lunchtime, the green box in the welfare cabin has three plasters and an empty eye-wash bottle, and nobody's sure of the postcode to give the ambulance. None of that is bad luck. It's what happens when nobody has done a proper first aid needs assessment.
A first aid needs assessment is the process an employer uses to decide what first-aid equipment, facilities and people are "adequate and appropriate" for their workplace, as required by the Health and Safety (First-Aid) Regulations 1981. It looks at your hazards, your headcount, your shift patterns, how remote the site is and your accident history. The answer tells you whether you need an appointed person or trained first-aiders, how many, what training they need, and what goes in the kit.
This guide covers what the law actually says, how to carry out the assessment step by step, and what it looks like on real construction, security and facilities management jobs.
What the law requires
The Health and Safety (First-Aid) Regulations 1981 are short. The parts that matter day to day are:
- Regulation 3(1): the employer must provide equipment and facilities that are adequate and appropriate for giving first aid to employees who are injured or become ill at work.
- Regulation 3(2): the employer must provide an adequate and appropriate number of suitable people to give first aid, with suitable training and qualifications.
- Regulation 3(4): where it's adequate and appropriate given the work, the number of people and the location, the employer can appoint a person to take charge instead of providing trained first-aiders.
- Regulation 4: employees must be told about the arrangements, including where the equipment, facilities and people are.
- Regulation 5: self-employed people must provide adequate and appropriate first-aid equipment for themselves.
The regulations don't use the phrase "needs assessment". That comes from HSE's guidance, L74 First aid at work, which says an employer should assess first-aid needs appropriate to the hazards and risks of each workplace. It's the only sensible way to show your provision is "adequate and appropriate", which is the test the law sets.
Two points catch people out. First, the regulations apply to every workplace, including those with fewer than five employees. Second, there's no legal requirement to write the assessment down. HSE does say a written record is useful, because it lets you show an inspector or safety rep how you reached your decision. On any site with real hazards, write it down.
Appointed person vs first-aider
People mix these two up all the time.
Appointed person
An appointed person takes charge of the first-aid arrangements. They look after the equipment and facilities and call the emergency services when needed. According to L74 they don't need first-aid training, though HSE says they may benefit from an emergency first aid at work (EFAW) course.
HSE's checklist treats an appointed person plus a suitably stocked first-aid box as the minimum provision for low-hazard workplaces with small numbers of staff, such as a small office.
There's a second use for an appointed person. Where your assessment says you need first-aiders, an appointed person can stand in only when a first-aider is absent in temporary, exceptional and unforeseen circumstances. Annual leave doesn't count. If your plan relies on the appointed person covering a first-aider's fortnight in Spain, the plan's wrong.
First-aider
A first-aider has completed suitable training and holds a current qualification. L74 describes an optional four-layer framework: appointed person, EFAW, FAW and additional training. The three first-aider layers are:
- Emergency first aid at work (EFAW): covers giving emergency first aid to someone who's injured or taken ill at work.
- First aid at work (FAW): includes EFAW and adds first aid for a range of specific injuries and illnesses. The initial course is three days.
- Additional training: for specific hazards your assessment identifies, covered further down.
Certificates for FAW, EFAW and other suitable qualifications are valid for three years. The FAW requalification course lasts two days, and HSE strongly recommends annual refresher training during the three years, although it isn't mandatory. HSE stopped approving first-aid training providers in 2013, so it's now for the employer to check that a provider is competent. L74 explains what to look for.
L74 also says that where 25 or more people are employed, even in low-hazard environments, at least one trained first-aider should be provided. Beyond that, HSE's suggested numbers (in the flow chart in L74) are suggestions only. Your hazards and working patterns decide the real number.
How to carry out a first aid needs assessment
L74 lists the factors to consider. Here they are as a working process.
1. Start from your risk assessment
The Management of Health and Safety at Work Regulations 1999 already require you to assess risks. Use those findings. If your construction risk assessment lists cutting tools, work at height, plant movements and hot works, those tell you the likely injuries: lacerations, fractures, crush injuries, burns and falls. Provision should match what could realistically go wrong when your controls fail.
L74 splits hazards into three broad types. Low-level hazards such as offices and shops. Higher-level hazards such as chemicals or dangerous machinery. And special hazards such as hydrofluoric acid or confined spaces, where you should consider extra training, extra equipment and telling the emergency services about the hazard in advance.
2. Look at your workforce
Think about the people as well as the work. L74 mentions young workers, trainees, pregnant workers and employees with known health conditions such as asthma, diabetes, epilepsy or heart problems. It also covers mental health. The 2024 update to L74 says it may help to have people trained to recognise mental ill health and support someone experiencing a mental health issue.
3. Check your accident history
Your accident book and incident reports are evidence. If you've had two hand injuries from the same saw bench this year, your first-aid provision should cater for that type of injury and the kit should reflect it. Our guides to the accident book and RIDDOR reporting cover the recording side.
4. Count people on every shift, not just the total
Headcount matters, but not on its own. L74 points out that more provision may be needed when fewer people are at work but they're doing higher-risk tasks such as maintenance. Look at each shift, weekend working and out-of-hours call-outs. Provision has to be in place whenever people are at work.
5. Map the site
How long would it take a first-aider to reach someone at the furthest point? Multi-storey buildings, split sites and large compounds may need provision on each floor or in each building. The kit needs to be where the risk is, not locked in the site office.
6. Check how remote you are
If the site is a long way from emergency services, L74 says you should tell them your location in writing, think about emergency transport and check whether the kit is enough if help is delayed. A precise location, a clear access route and a named person to meet the ambulance at the gate all help.
7. Sort out shared sites
On a shared or multi-occupied site, one employer can provide first-aid cover for everyone. HSE strongly recommends a written agreement between employers so there's no confusion about who's covering whom. Self-employed people on someone else's premises are still responsible for their own provision, though joint arrangements are allowed.
8. Plan for absence
Holidays, training days and sickness all leave gaps. Plan cover for planned absences with other first-aiders, not the appointed person.
9. Decide on non-employees
The 1981 Regulations don't require first aid for anyone other than your own employees. HSE strongly recommends including them anyway. For a shopping centre, a stadium or a school, the public is a big part of the picture.
10. Record it and tell people
Write down what you decided and why. Then meet regulation 4: put up first-aid notices at each site, cover the arrangements in the site induction and make sure agency staff and visitors know who to call.
What goes in a first aid kit?
There's no mandatory list. L74 suggests a minimum stock for low-hazard work:
- a leaflet giving general guidance on first aid, such as HSE's Basic advice on first aid at work
- 20 individually wrapped sterile plasters in assorted sizes
- two sterile eye pads
- two individually wrapped triangular bandages, preferably sterile
- six safety pins
- two large and six medium sterile, individually wrapped, unmedicated wound dressings
- at least three pairs of disposable gloves
HSE also points to British Standard BS 8599 for workplace kit contents. Whichever you use, the kit should reflect your assessment. A kit for a groundworks gang handling cutting tools needs to deal with serious bleeding. L74 lists haemostatic dressings, wound packing and tourniquets for life-threatening bleeding as additional training that may be relevant in construction, agriculture, forestry and remote work.
For travelling and lone workers, L74 suggests a smaller personal kit and a way of calling for help, such as a mobile phone. Someone needs to own restocking, or the kit will be empty when it matters.
If your assessment leads you to provide a defibrillator (AED), PUWER applies. Provide the manufacturer's instructions and consider training. AED use is now part of the FAW and EFAW syllabus.
Practical examples from UK sites
Construction: a mid-sized housing site
Forty operatives at peak, with groundworks, scaffolding, roofing and plant. That's higher hazard, well over 25 people and spread over a large area. A sensible outcome might be several FAW-trained first-aiders spread across trades and shifts, kits at the welfare unit and at each work zone, bleed-control equipment where cutting tools are in use, and a first-aid room if the site is large. L74 notes a first-aid room is usually necessary on large construction sites. Several contractors share the site, so the arrangements need to be agreed in writing, and the principal contractor will often coordinate them through the construction phase plan. Our construction industry page covers how RAMS fit alongside all this.
Construction: a two-person trade crew
An electrician and an apprentice on a domestic rewire. The same rules apply at a smaller scale. The site's close to emergency services and the hazards are known: electric shock, cuts and falls from steps. A travelling kit in the van, a charged phone and at least one of them holding EFAW is a reasonable starting point. If the apprentice is under 18, they're a young worker, and the assessment should note that.
Security: static guarding and door teams
New applicants for SIA door supervisor and security guard licences must hold an EFAW or equivalent qualification before their licence-linked training. That's useful, but it's a licensing requirement. It doesn't replace the employer's needs assessment. A lone night guard on a remote industrial estate needs a way of raising the alarm and a personal kit. A door team at a busy venue deals with the public, so HSE's advice to include non-employees and L74's reference to training for violent incidents both apply.
Facilities management: a multi-site contract
A cleaning and maintenance contract across ten office buildings, with mobile engineers. Each client building may already have first-aid provision, so this is a shared-site question. Agree in writing whether your staff can use the client's first-aiders, and cover the mobile engineers with personal kits and lone-working procedures. Plant rooms and roof access carry different risks from the office floor. The facilities management risk assessment guide covers the wider picture.
Common mistakes
- Treating the appointed person as holiday cover for first-aiders.
- Counting total staff but ignoring nights, weekends and call-outs.
- Keeping one kit in the office on a site that's a ten-minute walk end to end.
- Assuming SIA licence holders or a client's first-aiders cover your team without agreeing it.
- Letting certificates lapse. After expiry, the person is no longer considered competent to act as a workplace first-aider.
- Never reviewing it. Change the work, the site or the headcount and the assessment should change too.
How swiftRMS helps
First-aid arrangements sit alongside your task risk assessments and method statements. On site, the emergency section of the RAMS is where operatives look for who the first-aiders are, where the kit is and what to do in an emergency.
swiftRMS drafts RAMS for construction, security and facilities management work. Each draft is legislation-referenced and includes an Emergency Procedures section with the nearest A&E and the route to it. On the Business plan, your own first aid, fire and incident wording and contacts go on every document, so the names and locations from your needs assessment carry through. The hazards it raises, such as cutting tools, confined spaces or lone working, help you check that your first-aid provision matches the task. Every draft is ready for review. A competent person still has to review, edit and approve it before anyone uses it on site. You can see what the output looks like on our RAMS examples page.
If you'd like to see how a first-aid section reads in a real draft, try a free RAMS preview with no signup. When you're ready, there's a 14-day free trial with no card needed.
Frequently Asked Questions
Is a first aid needs assessment a legal requirement?
The Health and Safety (First-Aid) Regulations 1981 require employers to provide first-aid equipment, facilities and people that are adequate and appropriate in the circumstances. HSE's L74 guidance says employers should assess their first-aid needs to decide what that means for their workplace. There's no legal requirement to write the assessment down, but a written record helps you show how you reached your decision.
How many first-aiders do I need?
There's no fixed number. L74 says that where 25 or more people are employed, even in low-hazard environments, at least one trained first-aider should be provided. Higher-hazard work, shift patterns, split sites and remoteness all push the number up. L74 gives suggested numbers, but HSE is clear they're suggestions and your assessment decides.
What is the difference between an appointed person and a first-aider?
An appointed person takes charge of the first-aid arrangements, looks after the kit and calls the emergency services. They don't need first-aid training. A first-aider holds a current qualification such as EFAW or FAW and can give first aid. An appointed person can only cover a first-aider's absence in temporary, exceptional and unforeseen circumstances, not planned leave.
How long does a first aid certificate last?
FAW, EFAW and other suitable first-aid certificates are valid for three years. The FAW requalification course lasts two days. HSE strongly recommends annual refresher training during the three-year period, although it isn't a legal requirement.
Do I have to provide first aid for members of the public?
Not under the 1981 Regulations, which only cover your own employees. HSE strongly recommends that organisations serving the public, such as venues, shops and schools, include non-employees in their first-aid provision.
Who covers first aid on a shared construction site?
Each employer is responsible for its own employees, but employers can agree that one of them provides first-aid cover for everyone on site. HSE strongly recommends putting that agreement in writing and sharing information about the hazards so the shared provision is adequate.
Official Resources
Recommended Tools & Resources
Save hours on health & safety paperwork — generate documents with swiftRMS.
Create a professional RAMS in under 2 minutes — UK legislation cited automatically.
From £49/mo. CDM 2015 referenced. 14-day free trial, no card needed.
The UK RAMS tools side by side: features, pricing and speed.
12+ trade-specific UK risk assessment templates with hazards and legislation.